Technical Data; Noise & Vibration; Care & Maintenance; Replacement Parts - Pattfield Ergo Tools PE-ARM 3440 Li Traduction De La Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10

Technical Data

Type
Nominal voltage
Max. cutting width
Grass bag capacity
Cutting heights
Cutting heights positions
Net weight
Sound pressure level (L
)
pA
Measured sound power level (L
)
WA
Max. vibration emission (a
)
hw
SUITABLE BATTERIES
Voltage
Capacity
SUITABLE CHARGER
Nominal voltage
Output voltage
Charging time
Operation temperature
Protection Class
Weight
SUITABLE CHARGER
Nominal voltage
Output voltage
Charging time
Operation temperature
Protection Class
Weight
Please observe the article number on the type plate of the appliance. The trade names of the
individual appliance may vary.
140
EN
Battery lawn mower
max. 40 V
(2 x 20 V)
340 mm
30 litres
33 - 83 mm
6
12.4 kg
87 dB(A) / Uncertainty K = 3 dB(A)
93.7 dB(A) / Uncertainty K = 2.1 dB(A)
≤ 3.6 m/s² / Uncertainty K = 1.8 m/s²
PE-AK2 (6801240 2x included)
PE-AK4 (6801241 optional)
20 V
PE-AK2 (6801240): 2.0 Ah Li-ion battery
PE-AK4 (6801241): 4.0 Ah Li-ion battery
Double charger (included)
100-240 V ~ 50/60 Hz, 50 W
20 V
2,0 A
75 min for 2 x PE-AK2
140 min for 2 x PE-AK4
10-40 °C
/ II
0,2 kg
PE1H quick-charger (6801242 optional)
100-240 V ~ 50/60 Hz, 78 W
20 V , 3.0 A
60 min for PE-AK2
120 min for PE-AK4
10-40 °C
/ II
0.25 kg
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN ISO 3744:1995 and ISO 11094:1991 and
can be used to compare appliances.
It may be used for a preliminary assessment
of exposure.
Care & Maintenance
Caution! Make sure the appliance is
switched off and the batteries are
removed.
- Always keep the appliance clean, dry and
free of oil or grease.
- Wear safety glasses and gloves to protect
your eyes and hands whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check for obvious defects and/or
damaged components.
- Periodically check all fixings. These could
become loose with time due to vibration.
- Check the collection bag regularly for signs
of wear.
- The most used part is the blade. Inspect the
blades regularly:
- If the blade is worn or blunt, it must be
replaced immediately.

Replacement parts

Please quote the following data when ordering
replacement parts:
- Type of machine
- Article number of the machine
- Identification number of the machine
- Replacement part number of the part re-
quired
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the appliance.
- If the appliance starts to vibrate exces-
sively, the blades seem to be unbalanced
and must be replaced.
- Replace any worn or damaged parts.
- If the body of the appliance needs cleaning,
wipe it with a brush or a soft damp cloth. A
mild detergent can be used but nothing like
alcohol, petrol or similar cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Store the battery and the appliance sepa-
rately.
- Charge the battery before storing the appli-
ance in winter.
- Store the appliance in a dry and frost-free
place (10-25 °C).
EN
141

Publicité

Table des Matières
loading

Table des Matières