Pattfield Ergo Tools PE-ARM 3440 Li Traduction De La Notice Originale page 70

CABLE CLIPS
1 Fasten the power cable to the handle
15 with the cable clips 4.
COLLECTION BAG
1 Lift the safety flap 5 and attach the col-
lection bag 12 to the mower. Lower the
flap again.
Caution! Wait until the blade has
come to a complete stop before
opening the safety flap.
SWITCHING ON
1 In order to switch on the appliance,
plug in and push the release key
the right and hold it. Lift the on/ off trig-
ger 1 towards the handle 15. The key
snaps in and stays locked until the on/
off trigger is released.
CUTTING HEIGHT
1 Pull out the height adjustment lever
10 and move it to the desired cutting
depth.
Caution! Make sure the appliance is
switched off.
REPLACING THE BLADE
1 Loosen the fastening screw A
move the worn blade.
Caution! Switch off and remove the
batteries first. Always use protective
gloves.
138 EN
BATTERIES
2 Lift the battery cover 7 and push in two
charged batteries until they click into
place.
Caution! Make sure the batteries
are always charged to the same
level.
FILLING INDICATOR
2 The collection bag 12 provides a filling
indicator 3:
Collection bag empty: Flap floats
Collection bag full: Flap falls down
SWITCHING OFF
2 To switch off the appliance, release the
2 to on/ off trigger 1. The release key
engages automatically.
Caution! Wait until the blade has
come to a complete stop before
switching on the appliance again.
and re- 2 Insert new blade with the inscription
"GRASS SIDE" showing away from the
motor. Tighten the fastening screw A.
1
1.
1
2.
1
2 dis-
1
1
2
2
1. 2
2.
2
A
A
EN 139