Operation - Bartscher 1365T3 Manuel D'utilisation

5.2 Operation

Before first use

Before the initial start-up, clean the saladette. Follow the instructions in section 6
„Cleaning and maintenance".

Plug the device to the single, grounded socket.

Turn the device with ON/OFF power switch located on the front panel of the device.
The green power indicator in the switch will come on. The digital display will show the
current temperature inside the device.

Before first use and placing any food products in the saladette, or the cooling top,
the device should reach the required temperature.
Digital temperature control
Basic settings of the temperature are pre-set and reflect the operating temperature in
the range of 0 °C – 10 °C inside of the device. During normal operation of the device the
digital display indicates the current temperature inside of the device.
Button Functions
Display a required value, select parameters
in programming mode or save the procedure
Manual start of defrost
In programming mode, select a parameter
code, increase the displayed value
In programming mode, select a parameter
code, decrease the displayed value
AUX
- 45 -