Tune To A Dab Preset Station; Dab Display Informationen - Telestar IMPERIAL DABMAN 30 Manuel D'utilisation

7.5 Tune to a DAB preset station

In DAB mode:
1. Press the 'Preset' button. Preset location 1 will be displayed.
2. Turn the rotary 'Tune' control to display the preset location (1-10) that you would like
to select. Press the 'Tune' control. The radio will instantly tune to the stored station
and begin to play.
Alternatively, for preset locations 1, 2 and 3, you can simply press the '1', '2' or '3'
button on the front of the radio for quick and fast access to stations stored there.
Note: If no DAB station has been stored under a preset location, 'Preset Empty X' is dis-
played and after a few seconds the display will revert to the previously selected station.
7.6 DAB Display Information
E
When listening to a DAB station you can change the information that will appear on the
second line of the display. There are seven different types of information that are sent by
the broadcaster.
Dynamic Label Segment (DLS) -
this is scrolling text information supplied by the broadcaster. Information could be the
name of an artist or music title, DJ's name, contact details for the radio station etc.
Program Type (PTY) -
such as 'Rock', 'Pop', Talk' or 'News'
Multiplex Name -
displays the broadcasting area and collection of radio stations on this frequency eg: BBC
National DAB, Digital 1 Network.
Signal Strength -
An empty will appear on the second line of the display to indicate the minimum signal
strength for acceptable listening. The row of solid rectangles indicate the actual signal
strength that you are receiving. The stronger the signal, the further to the right the row
of solid rectangles will be.
Time -
supplied by the broadcaster.
Channel and Frequency -
eg: 12B 22 5.64 MHz
Signal Information -
Stereo or Mono and the data rate at which the signal is being transmitted.
1. Press the 'Info' button repeatedly to move through the display options.
Operating Manual 30