Disposal - VOLTCRAFT VC-86 Notice D'emploi

Troubleshooting
By purchasing the digital multimeter, you have acquired a product which
has been designed to the state of the art and is operationally reliable.
Problems and malfunctions may, however, arise.
For this reason, we wish to describe to you here how you can elimi-
nate possible disturbances easily yourself.
Always observe the safety instructions!
Fault
The multimeter
does not function.
No measurement of
current possible
(only VC-86).
None measured
value alteration..
Repairs other than those just described should only be
performed by an authorised electrician.
IOf you have queries about handling the measuring
device, our technical support is available under the fol-
lowing telephone number:
Voltcraft, 92242 Hirschau, Tel. no. 0180 / 586 582 723 8

Disposal

If the product is no longer functional and can no longer be
repaired, dispose of it in accordance with the relevant statu-
tory regulations.
Possible cause
Are the batteries flat?
Check the condition of the batteries.
Is the fuse for the current measure-
ment area defective?
Check the fuse
(replacement of fuse)
Is the HOLD function active?
Operatie the button "DH".
39