Korg Pa Série Mode D'emploi page 4

8. When the loading procedure is finished, the "System
Update Completed" message appears, inviting you to re-
start the instrument.
9. Put the instrument to standby by keeping the STANDBY
button pressed for about one second, then turn it on again
by shortly pressing the STANDBY button.
Loading the Musical Resources
(Factory Restore)
Loading the Operating System may also update Styles,
Pads, Sounds and Performances. This type of data is not
actually updated until you execute a Factory Restore. The
need for a Factory Restore is indicated in the documents
accompanying the Operating System.
Warning: Executing a Factory Restore will delete all User
data and all custom Factory data (if any). See the "Making a
safety copy of your data" section above for instructions on
how to make a safety copy of your data.
1. Press the MEDIA button, then touch the Utility tab to
access the Utility page.
2. Select the Factory Restore option, then touch the Ex-
ecute button.
3. A message appears, asking you if you want to erase
all the data in the internal memory. Touch Yes to confirm
(or No to cancel). All the Factory data will be reloaded and
updated, and all User data will be erased.
4. If you have saved your User and/or custom Factory
data, reload them by using the Media > Load operations.
See the "Media" chapter in the User's Manual for more in-
formation.
2