Korg Pa Série Mode D'emploi page 3

Pa-Series – Operating System Update
Introduction
Korg may release updates to the instrument's Operating
System. Updates can include new features, improvements,
bug fixes, new sounds and/or styles. The most up-to-date
version can be downloaded from our web site
com).
Note: By loading the new Operating System, you also load
all the features added by the previous updates.
Note: Please do not turn the instrument off before the
loading operation has been completed!
Making a safety copy of your data
Loading this file will not modify your User data, but we sug-
gest you create a safety copy of your data before proceed-
ing.
• To save all User data, use the Media > Save All procedure.
• In case there are custom Factory Styles and Pads in the in-
ternal memory, go to the Global > Mode Preferences > Media
page and remove the protection to the Factory Styles and
Pads you want to save; then use the Media > Save proce-
dures to save single items or banks.
• In case there are custom Factory Sounds in the internal
memory, backup all your data by using the Full Resource
Backup command in the Media > Utility page.
See the "Media" chapter in the User's Manual for more in-
formation.
Loading the Operating System
Here is how to load the Operating System of your instru-
ment.
1. Unzip the Operating System file from the .zip archive,
and copy the resulting .pkg file to an USB storage device.
2. If it is on, keep the STANDBY button pressed for about
one second to set the instrument to standby. Then keep the
INTRO 1 button pressed, and press the STANDBY button to
turn the instrument on again.
3. Keep the INTRO 1 button pressed, until the Touch Panel
Calibration page appears: this will confirm that the system
loading procedure has been started. Execute the display
calibration by touching the red cross wherever it appears.
4. A message will appear, asking you to select a .pkg file.
Connect the USB storage device where you copied the sys-
tem file to the USB HOST port, then touch the OK button in
the display to close the dialog box.
5. When a file selector appears, use the Device pop-up
(www.korg.
menu (in the lower left side of the display) to choose the
device connected to the USB HOST port. Then touch the Op-
erating System .pkg file to select it, and touch the Select
button on the display to confirm loading.
Device pop-up menu
6. A dialog box will appear, asking you to choose whether
to update or to cancel the operation. Touch the Update but-
ton to confirm updating the Operating System.
7. A progress bar appears, showing the loading status.
1
File selector