Controls On Remote Control - Alpine TUE-T200DVB Mode D'emploi

Controls on remote control

1
2
3
4
5
6
7
8
9
1 A/V button
Press the button and the source will change as
shown below:
DVB-T
2 Number buttons
Preset services and Teletext pages can be
directly accessed by using the number buttons.
3 Exit button
Press the button to return from a menu.
4 buttons
Press the up/down buttons to navigate the
OSD or to load the next/previous Teletext
page.
5 buttons
Press the left/right buttons to navigate the
OSD or to skip the next/previous 100
Teletext pages.
6 Audio button
Press the button to enter the audio setup
menu.
7 Back button
Press the button return to the previously
selected service.
8 Hotkey buttons
Press the list button to show a list of all
available services.
Press the info button to show reception
details.of the currently selected service.
6-EN
10
11
12
13
14
15
16
17
18
Radio A/V 1 A/V 2
9 Teletext menu buttons
Navigate the Teletext shortcut menu by
pressing these buttons
In TV mode the yellow/blue button can be
pressed to select the next/previous
favourite service.
10 Power button
Press the button to turn the DVB-T tuner
unit on/off.
11 CH+ / CH- buttons
Press these buttons to select the next/prev.
preset service.
12 VOL+ / VOL- buttons
Press these buttons to adjust the volume
ouput level.
13 Menu button
Press the button to enter the main menu.
14 OK button
Press the button to select a highlighted
menu item or to confirm a number input.
15 Scan button
Press the button to start the auto scan
procedure.
16 Mute button
Press the button to switch on/off the audio output.
17 TXT button
Press the button to enter the Teletext menu.
18 EPG button
Press the button to enter the Electronic
Program Guide menu.