Error Log; Total Unit Hours; Firmware Versions - Sunoptic Surgical Titan x350 Mode D'emploi

After installing a new filter, touch
next 250 hours of unit operation.
6.2.2.4.4
The error log functiondisplays error codes useful for repair service. The minus
plus controls will cycle through the error codes logged.
6.2.2.4.5
Displays total hours of unit powered up operation (rear panel mains power switch on.)
6.2.2.4.6
Displays the firmware dates of the two processors (K70 and PIC.) The minus
plus controls will cycle between them.
LIT-218 Sunoptic Surgical
Rev. C
RESET FILTER

ERROR LOG

Lamp Hours :
_
MENU

TOTAL UNIT HOURS

Lamp Hours :
12/APR/2016 02:39:26
MENU

FIRMWARE VERSIONS

Lamp Hours :
_
MENU
®
Page 17 of 170
to turn off the flashing signal for the
20
E1
+
Error Log
20
248
Total Unit Hours
20
K70
+
A.0
FW Date
or
or
(English)