Setting Remote Control; Remote Diagnostics; Software Update; Data Protection - Thermador ME301YP Guide D'utilisation Et D'entretien

Setting remote control

You can use the Home Connect app to easily access
the functions of your oven.
Note
Operating the appliance directly from the oven always
¡
has priority. During this time, it is not possible to oper-
ate the oven using the Home Connect® app.
The remote control is already activated when you con-
¡
nect your oven
If the remote control has been deactivated, only the
¡
oven's operating statuses will be displayed in the
Home Connect® app.
The remote control is automatically activated when
¡
the remote start is activated.
Press SETTINGS to cycle through available options
1.
until "HOME CONNECT SETTINGS" is displayed.
Press ENTER.
2.
"PRESS ENTER FOR HC" is displayed.
a
Press SETTINGS to cycle through available options
3.
until "REMOTE CTRL DISABLED" or "REMOTE CTRL
ENABLED" is displayed.
Press ENTER.
4.
"PRESS 1 REMOTE CTRL ON" or "PRESS 0 REMOTE
a
CTRL OFF" is displayed.
Press 1 or 0 to switch remote control on or off.
5.

Remote diagnostics

The after-sales services can access your appliance via
Remote Diagnostics if you ask them to do so, if your ap-
pliance is connected to the Home Connect® server and
if Remote Diagnostics is available in the country where
you are using the appliance.
Tip: Further information and details about the availability
of Remote Diagnostics in your country can be found in
the Service/Support section of your local website:
www.home-connect.com

Software update

Using the software update function, your oven's software
can be updated, e.g. for the purpose of optimization,
troubleshooting or security updates.
To do this, you need to be a registered Home Connect®
user, have installed the app on your mobile device and
be connected to the Home Connect® server.
As soon as a software update is available, you will be in-
formed by the Home Connect® app, from which you will
also be able to download the update. Once the update
has been successfully downloaded, you can start in-
stalling it via the basic settings of your oven, or the
Home Connect® app if you are on your local area net-
work. The Home Connect® app will notify you once in-
stallation is complete.
Note
You can continue to use your oven as usual while up-
¡
dates are downloading.
Depending on your personal settings in the app, soft-
¡
ware updates can also be set to download automati-
cally.
We recommend that you install security updates as
¡
soon as possible.

Data Protection

Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the Home Connect®
server (initial registration):
Unique appliance identification (consisting of appli-
¡
ance codes as well as the MAC address of the in-
stalled Wi-Fi communication module).
Security certificate of the Wi-Fi communication module
¡
(to ensure a secure data connection).
The current software and hardware version of your ap-
¡
pliance.
Status of any previous reset to factory settings.
¡
This initial registration prepares the Home Connect®
functions for use and is only required when you want to
use the Home Connect® functions for the first time.
Note: Please note that the Home Connect® functions
can be utilized only with the Home Connect® app. Infor-
mation on data protection can be called up in the
Home Connect® app.

Wi-Fi module

FCC/IC Statements
Model: COM2
FCC ID: 2AHES-COM2
IC ID: 21152-COM2
The Home Connect® Wi-Fi module is a communication
device designed to provide communication between ap-
pliances and smart devices.

FCC COMPLIANCE STATEMENT

CAUTION
Risk of injury!
Changes or modifications not expressly approved could
void your authority to use this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
¡
This device must accept any interference received, in-
¡
cluding interference that may cause undesired opera-
tion.

INDUSTRY CANADA STATEMENT

This device complies with Industry Canada license ex-
empt RSS standard(s).
Operation is subject to the following two conditions:
This device may not cause interference, and
¡
This device must accept any interference, including in-
¡
terference that may cause undesired operation of the
device.
Home Connect® en-us
23