Antari F-1 Fazer Mode D'emploi page 9

Address Setup – Use control menu to set DMX address. The machine occupies 2 control
channels. The starting address is defined as the first channel from which the machine will
respond to the controller. Always double check to make sure there are no overlapping
channles in order to control the machine correctly.
DMX Channel Function
Channel Mode
2
1
Sync
Channel
1
2
1
1
9
Value Function
0-4 Faze off
5-255 Faze 1-100%
0-4 Fan 20%
5-255 Fan 21-100%
0-4 Faze off
Fan 100%
5-255 Faze 1-100%
Fan 100%
0-4 Faze Off
Fan 20%
5-255 Faze 1-100%
Fan 21-100%