Antari F-1 Fazer Mode D'emploi page 8

Run Last Setting
Keypad Sound
DMX Connector Pin Assignment
The machine provides a 3- or 5-pin XLR connector for DMX connection. The diagram below
indicates pin assignment information.
DMX Operation
Making the DMX Connection – Connect the machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses a 3-pin or 5-pin XLR connector for DMX
connection, the connector is located on the front of the machine.
Turn On/Off run last setting function
XX
Turn On/Off Keypad Sound
XX
Pin
1
2
3
4
5
Function
Ground
Data-
Data+
N/A
N/A
8