Art. 2410W
Telephone
Telephone like Art. 2408W/A with additional switch and LED
Privacy or Doctor facility (automatic lock opening following
the call). See the technical sheet inside the article for the
connection to the system.
Art. 2428W
-
+
C
M I
-
+
1
2
Telephone
Telephone in the OKAY line with dimensions: 85x223x65 mm.
Fitted with door-opening push-button and switchboard call
push-button, to be used for various purposes in the systems not
provided with a switchboard (see variant C on page 109).
Equipped as standard with local floor call function (see variant D on
page 109) and call repetition (see SB2/D on page 105). Telephone
to be used in mixed audio-video systems upstream of Art. 4896 or
in audio systems when the call repeat function is required. Up to
three telephones with the same user code can be inserted in the
same system. For methods of inserting additional telephones with
the same user code, see variants SB2/A4 and SB2/A5 on page 102.
To set user code, see "Programming telephone Art. 2408W/A,
2428W and bracket Art. 4714W/2" on page 40.
Technical characteristics:
1. Door-opening push-button.
2. Switchboard call push-button/push-button for various uses
present in the terminal board (P1 C1).
3. Terminal connection System with
L L connection to the line bus.
CFP CFP local floor call input.
P1 C1 push-button normally dedicated to various services.
To have a clean NO contact, cut bridges CV2 and CV3.
S+ S- terminals to connect a bell repetition device to.
4. Dip switches for setting user code (see page 40).
5. Microphone volume adjustment trimmer.
6. Call tone volume adjustment trimmer.
EXTERNAL UNITS
In Simplebus2 systems, external units of the Powercom,
Vandalcom and Logicom Series can be used. For Vandalcom and
Logicom, refer to technical sheet FT/SB/01 and to Catalogue 50.
Powercom Series speaker unit
Consisting of Art. 3320 + Art. 1602.
Speaker unit with terminal board and double amplifier, watertight
loudspeaker and electret microphone.
Microphone and loudspeaker volume adjustable from the front
5
on Art.1602 (see page 32); possibility of rear adjustment as well
6
in the case where it is mounted on Art. 3320.
4
The microphone can be removed to improve the acoustic output
(see page 32). Aluminium alloy call button with name label
extractable from the front. Complete with microprocessor and Dip
3
switches with 8 positions for programming the calls to the users.
For push-button programming, see page 42. 12V AC power supply
(use Art. 1195). Door-opening function by means of an electric
switch (3A only AC).
Dimensions: 112x89.5x40 mm.
Powercom Series video speaker unit
Consisting of Art. 3321 + Art. 4660.
1/4" pin-hole CCD B/W high sensitivity adjustable camera.
Infrared illumination (6 LEDs) .
Complete with terminal board and speaker unit with double
amplifier, watertight loudspeaker and electret microphone.
Microphone and loudspeaker volume adjustable from the front
on Art.4660 (see page 32). Possibility of rear adjustment as well
in the case where it is mounted on Art. 3321.
The microphone can be removed to improve the acoustic output
(see page 32). Aluminium alloy call button with name label
extractable from the front.
Complete with microprocessor and Dip switches with 8 positions
for programming the calls to the users. For push-button
programming, see page 42. 12V AC power supply (use Art. 1195).
Door-opening function by means of electronic switch on board
(3A only alternating).
Dimensions: 112x89.5x40 mm.
MT SB2 01
29
MT SB2 01