PrimAster PMGBS 7220 Mode D'emploi page 21

• Do not use shears with a damaged or ex-
cessively worn-out cutting part
• Ensure that all protective devices and han-
dles are installed on the machine. Never try
to put an incomplete machine in operation.
• Always use the protective part designed for
the blade when transporting and storing the
shears.
• Before starting the work, make yourself
familiar with the surroundings and possible
dangers which you may not hear because
of the noise.
• Only use the spare sparts and accessories
recommended by the manufacturer.
• Note that the user shall be responsible him-
self for accidents and hazards that result to
other people or their property.
• Prior to using the machine, inspect it visu-
ally for damaged, missing, or incorrectly
attached protective devices or coverings.
• Never use the machine with damaged cov-
erings or protective devices or without the
covering or protective devices.
• Eye protection, long pants, and sturdy foot-
wear must be worn the entire time the
machine is used.
• The machine should not be used in case of
poor weather conditions, especially in case
of lightning.
• Always switch off the machine
- if the machine is left unattended.
- before inspecting or working on the ma-
chine
- after contact with foreign objects
- if the machine begins to vibrate strangely
• Always ensure that the ventilation openings
are kept free of foreign objects.
• Always maintain your balance to stand se-
curely on slopes. Walk, don't run.
• Warning! Do not touch moving danger-
ous parts before the machine has been
switched off and the moving dangerous
parts have come to a complete standstill.
GB | Operating Instruction
• A tingling feeling or numbness in the hands
Before starting
Charging the battery
Safety Instructions:
The tool is delivered with the lithium-ion battery charged.
However, we recommend recharging the battery before
the tool is operated for the first time.
- Use the included charging unit for charging the bat-
- Never use other charging unit. This will result in fire
- Always keep the charging unit clear of rain or mois-
- Never try to charge third-party batteries with this
- Check the housing, plug and cable for damage before
- Do not open the charging unit by force. In case of a
- The charging unit heats up during the charging pro-
- Never open the battery cells. Hazard of short circuits!
- In case of damage to the battery, hazardous vapours
- Protect the battery from heat, intense insolation and
Charging process:
To charge the battery connect the charging unit to an
electrical socket. Then connect the plug of the charg-
ing cable to the charging socket of the grass and shrub
shears or trimmer (fig. 2)
8
is sign of excessive vibration. Limit the
operating time, take sufficiently long work
breaks, distribute the work between several
people or wear anti-vibration gloves when
using the tool for extended periods.
tery only. It is specially designed to match the tool's
battery.
and/or explosion hazard!
ture. Hazard of electric shock! - Never charge the
battery in the open without protection, always choose
a dry, protected place.
charging unit. This will result in fire and/or explosion
hazard!
each use of the charging unit. Do not use the unit if
you detect damage.
defect, the charging unit must be replaced.
cess. Do not place the unit on a flammable surface or
operate it in a flammable environment. Fire hazard!
or fluids may escape. In case of incidental contact
flush with water and seek medical advice immedi-
ately. The fluid may have irritating or caustic effects
on the skin.
fire. Explosion hazard!