Introduction; Parts And Service; Nameplate; Uncrating The Machine - Nilfisk Retriever 6250 Mode D'emploi

INTRODUCTION

This manual will help you get the most from your Nilfisk-Advance Retriever
machine.
Note: Bold numbers in parentheses indicate an item illustrated on pages 6-10.

PARTS AND SERVICE

Repairs, when required, should be performed by Nilfisk-Advance service personnel using Nilfisk-Advance original replacement parts and
accessories.
Call Nilfisk-Advance for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
NAME PLATE
The Model and Serial Number of your machine are shown on the Nameplate on the right side of the machine. This information is needed when
ordering repair parts for the machine. Use the space below to note the Model and Serial Number of your machine for future reference.
MODEL
SERIAL NUMBER

UNCRATING THE MACHINE

When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton
so that it can be inspected by the carrier that delivered it. Contact the carrier immediately to file a freight damage claim.
1 After removing the crate, remove the wooden blocks next to the wheels.
2 Check the engine oil level, add oil if necessary.
3 Check the engine coolant level, add coolant if necessary.
4 Check the hydraulic oil level, add oil if necessary.
5 Read the instructions in the Preparing the Machine For Use section of this manual, then fill the fuel tank.
6 Place a ramp next to the front end of the pallet.
7 Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive the
machine forward from the pallet to the floor. Keep your foot lightly on the brake pedal until the machine is off the pallet.
CAUTION!
Use extreme CAUTION when operating this sweeper. Be certain that you are thoroughly familiar with all of the operating
instructions prior to using this sweeper. If you have any questions, contact your supervisor or your local Nilfisk-Advance
Industrial Dealer.
Should your sweeper malfunction, do not attempt to correct the problem unless your supervisor directs you to do so. Have a
qualified company mechanic or an authorized Nilfisk-Advance Dealer Service person make any necessary corrections to the
equipment.
Use extreme care when working on this machine. Neckties, loose clothing, long hair, rings and bracelets can get caught in
moving parts. Turn the Key Switch (52) OFF, set the Parking Brake (3) and disconnect the battery before working on the
machine. Use good common sense, practice good safety habits and pay attention to the yellow decals on this machine.
* Note: Reference the separately supplied engine manufacturer's maintenance and operator manual for more detailed engine
specification and service data.
6250 / SR 1800H. Read it thoroughly before operating the
™
FORM NO. 56041573 - Retriever
ENGLISH / A-3
6250 / SR 1800H - A-3
™