1. Open the APP Store or Google Play on your smartphone and look for the app
called Eurom Heating.
2. Download the Eurom Heating app.
3. Make sure that Bluetooth is switched on in the settings of your smartphone.
4. Switch on the terrace heater using the On/Off button at the top of the heating
cap.
5. Briefly press once on the reset button (at the top of the heating cap) to switch
on the device.
6. Subsequently, open the Eurom Heating app on your smartphone.
7. To connect your terrace heater to the app, you should take the following steps:
Go to the button at the left-hand bottom corner of the Home screen (Fig. 1).
-
Move the bar to the right to switch on the device (Fig. 2).
-
When using the device for the first time, you will be asked to enter a
-
password. The default password is 12345678 (Fig. 3). If the password is not
accepted, you can reset the password by pressing the reset button for 5
seconds.
Now your terrace heater is connected to the app and ready to use.
-
8. Control of the app:
For setting the heat capacity, you click once
-
on the 'sun' icon at the bottom of the screen.
Subsequently, the screen (Fig. 4) is shown:
-
32