EUROM Golden 2000 Amber Smart Manuel D'utilisation page 28

Masquer les pouces Voir aussi pour Golden 2000 Amber Smart:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 53
(3) Three brackets
-
(various sizes) for
suspension to tent
frame, parasol or
similar item, with
two wing nuts
A set of chains with
-
2x2 karabiner
hooks for ceiling
suspension
(8) The remote
-
control and fastening material.
The Eurom Golden 2000 Amber Smart has a separated electrical part with the
receiving point for the remote control, a reset button (6), an antennae for the blue
tooth connection (7) and an on / off switch (5) on the side.
The Eurom Golden 2000 Amber Smart is equipped with a top quality 2000W Golden
Amber ULG lamp that produces 90% less light. Alongside the comfortable 2000W
heat, the Golden ULG lamp also emits a natural, warm, subtle glow. The lamp has
an expected life of 8,000 hours; under normal circumstances, it should not have to
be replaced. Very intensive use can lead to precocious aging of the lamp and of
course an accident can break it. In that case, contact your dealer or a qualified
electrician. The lamp has a special connection and it is not allowed to not-qualified
people to remove or change it.
Installation
Before installing, secure the hanging bracket (9) to the heater. Using the Allen key,
undo the Allen screw (10) and pull the pin with the other screw out of the hole.
Place the hanging bracket (9) between both holes as indicated on the diagram.
Push the pin with the second screw back through the holes and the hanging
bracket. Then place the first Allen screw back and turn to secure using the Allen
key.
The Eurom Golden 2000 Amber Smart can be installed in three ways:
 Suspension from a wall (or possibly ceiling) by means of a wall bracket
 Suspension from a frame (parasol, tent or similar item) by means of a bracket
 Suspension from a ceiling by means of chains
Remove all package material (including the shock absorbing material around the
bulb) before installating the heater and check the appliance, supply cord and the
plug for signs of damage.
Carefully choose the right place to install your heater.
Before fastening, check that the minimum safe distances between the surroundings
and the chosen location are respected:
28

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

334104334111

Table des Matières