General Description; Inspection; Operation; Led - SKF LINCOLN PowerLuber 1260 Mode D'emploi

General description

Lincoln's 1260 PowerLuber is a lithium-ion
battery-operated grease gun developed for
manual lubrication of grease points.
Driven by a small, low-voltage electric
motor that is connected to a gear transmis-
sion. Rotary motion of the motor is con-
verted into a reciprocating motion of the
plunger, using a yoke mechanism. This Pow-
erLuber is a positive displacement single
acting pump.
Technology incorporated into the 1260
series PowerLuber includes:
• Motor protection preventing overload due
to excessive current draw
• Battery charge indicator displays battery
charge
• An LED to help locate grease fittings in dim
light

Inspection

Visually inspect for damaged, loose or miss-
ing parts. If equipment is worn or damaged,
remove from service. Contact an authorized
service center for damage assessment or
repair.

Operation

LED

• Tool's trigger turns on LED and motor.
• Short stroke of trigger turns on LED only.
• LED will turn off after 15 seconds, follow-
ing stop of the motor or trigger release.
Parts
Item no. Part
1 LED
2 Filler nipple plug
3 Hose
4 Vent valve
5 Support
6 Battery/gauge indicator
7 Hose holder
8 Battery
1260 series PowerLuber grease gun
Table 3
1
8
9
Fig. 1
3
4
2
5
6
7