General Regulations For Epa Version Engines - Ruggerini MD150 Utilisation Et Entretien

GENERAL REGULATIONS FOR EPA VERSION ENGINES

EPA version engines are subject to the regulations issued by the EPA (Environmental
Protection Agency).
In order to keep the engine in full compliance with the emission standards provided for
by the above-mentioned regulation, strictly observe the advice and recommendations
specified in this manual.
In particular, keep to the following instructions:
- Do not change the settings carried out by the Manufacturer
- Run the engine within the power and speed limits provided for by the Manufacturer
- Carefully carry out maintenance as indicated in the relevant table
- Immediately refer to a Ruggerini after-sales service in the event that anomalies are
noticed, especially in case the grade of smoke should change.
- Use Ruggerini original spare parts only
Regarding emissions, the Manufacturer is no longer liable in the event that:
- Ruggerini deems the engine application or installation inadequate.
- The engine is altered, or fitted with equipment that is not supplied nor approved by
Ruggerini.
- The user fails to upkeep the engine as provided for by the Manufacturer.
- The engine use exceeds the limits provided for by the Manufacturer.
- The user notifies any failure to the Ruggerini after-sales service with unreasonable
delay.
EPA-approved engines can be identified by the appropriate nameplate placed on the air
shroud.
English
23