Percent Weighing; Establishing A Reference Weight - Uline Ohaus Defender 5000 Mode D'emploi

5. After completion of I/O's setup, press the softkey
corresponding to the
application screen.
%

PERCENT WEIGHING

Use Percent Weighing to measure the weight of a
sample displayed as a percentage of a pre-established
reference weight.
1. Press the
Library
Mode
button until the icon
corresponding to
percent is displayed
in the upper left portion
of home screen.
(See Figure 65)
2. Establish a reference weight (see below) and then
place objects on pan to display percentage.
The default (or last) reference weight is displayed.

ESTABLISHING A REFERENCE WEIGHT

There are 3 methods to establish a reference weight:
Method 1
1. Key in the reference
weight value.
(See Figure 66)
2. Press the softkey
corresponding to the
icon for confirmation.
(See Figure 67)
Method 2
1. Press the softkey
corresponding to the
icon to enter the
submenu for setting
reference weight.
(See Figure 68)
2. Enter value
using keypad.
(See Figure 69)
PAGE 19 OF 101
APPLICATIONS CONTINUED
icon to return to the main
Figure 65
Figure 66
Figure 67
Figure 68
Figure 69
3. Press the softkey
corresponding to the
icon to save the
value. Press the softkey
corresponding to the
icon to exit submenu.
(See Figure 70)
Method 3
Place the reference weight on the pan and press the
button corresponding to the
APPLICATION SETUP
The application can be customized for user preferences.
1. Press the softkey
corresponding to the
icon to enter
Configuration.
(See Figure 71)
2. Select the list item
and press the softkey
corresponding to the
icon to change
settings as desired.
(See Figure 72)
3. To return to the application home screen, press the
softkey corresponding to the
Figure 70
icon.
Figure 71
Figure 72
icon.
0621 IH-8105