Weighing Unit - Uline Ohaus Defender 5000 Mode D'emploi

WEIGHING UNIT

Enter this menu to activate the desired units. Default
settings are bold.
NOTE: Due to national laws, the indicator may
not include some of the units of measure listed.
If the security switch is set to ON, the units are
locked at their current setting.
Choose desired unit, and set the status as listed below:
• Gram (G)
• Kilogram (Kg)
• Pound (Lb)
• Ounce (Oz)
• Pound: Ounce (Lb: Oz)
• Tonne (Metric Tonne)
• Ton (Short Ton)
Status:
Off = Disabled
On = Enabled
CUSTOM UNIT (C)
Use the custom unit to display weight in an alternative
unit of measure. The custom unit is defined using a
conversion factor, where the conversion factor is the
number of custom units per gram expressed in scientific
notation (Factor x 10^Exponent).
Factor
Set the conversion factor using the numeric keypad.
Settings of 0.1000000 to 1.9999999 are available.
The default setting is 1.0.
Exponent
Set the factor multiplier.
-3 = divide the Factor by 1,000 (1x10
-2 = divide the Factor by 100 (1x10
-1 = divide the Factor by 10 (1x10
0 = multiply the Factor by 1 (1x10
1 = multiply the Factor by 10 (1x10
2 = multiply the Factor by 100 (1x10
PAGE 11 OF 101
OPERATION CONTINUED
Least Significant Digit
Set the graduation.
The custom unit's name can be customized up to three
characters.
Set the status.
GLP/GMP MENU
Enter this menu to set the Good Laboratory Practice
(GLP) or Good Manufacturing Practice (GMP) data.
Date Format
Set the date format.
DATE
Set the date.
Refer to Menu Navigation (See Page 4) to enter settings.
TIME FORMAT
Set the time format.
)
-3
TIME
)
-2
) Set the time.
-1
)
0
)
1
)
2
Settings of 0.5, 1, 2, 5, 10 and 100 are available.
NOTE: Custom Unit is locked at off position
when the Security Switch is set to the locked
position. Custom Unit is not available when
Range is set to Dual interval.
Off = Disabled
On = Enabled
MM/DD/YYYY = Month/Day/Year
DD/MM/YYYY = Day/Month/Year
YYYY/MM/DD = Year/Month/Day
00 to 9999 = year position
01 to 12 = month position
01 to 31 = day position
24 hr = 24-hour format.
12 hr = 12-hour format.
24-hour format
00 to 23 = hour position
00 to 59 = minute position
0621 IH-8105