Friedrich Kühl KCS08 Manuel D'installation Et D'utilisation page 8

Control Panel Operation
The TM Menu continued
Auto mode selected. See Figure 23.
Set the cool setpoint for your first timer period using the arrow buttons.
The cooling mode timer only sets the cool setpoint. See Figure 24.
Next, set the heat setpoint for your first timer period. The heating mode
timer only sets the heat setpoint. See Figure 25.
Figure 23
MENU
Figure 24
MENU
Figure 25
MENU
Figure 26
MENU
14
Note: The auto mode timer sets both the cool and heat setpoint.
Set the time to start the first timer period. See Figure 26.
Control Panel Operation
The TM Menu continued
Set the cool setpoint for the second scheduled timer. See Figure 27.
Set the heat setpoint for the second timer.
Set the time to start the second timer period. See Figure 28.
Press the leftmost button to complete the time timer setup.
See Figure 29.
Figure 27
MENU
Figure 28
MENU
Figure 29
MENU
15