Friedrich Kühl KCS08 Manuel D'installation Et D'utilisation page 7

Control Panel Operation
The LIM Menu
This is the limit menu. See Figure 15.
Upon entering the menu, the first option will be to set the lower setpoint
limit using the arrow buttons. See Figure 16.
Figure 15
MENU
Figure 16
MENU
Figure 17
MENU
Figure 18
MENU
12
Then you can set the higher setpoint limit using the arrow buttons.
See Figure 17.
Pressing the leftmost button completes the limit setting. See Figure 18.
Control Panel Operation
The TM Menu
This is the TM menu used to set a timer. See Figure 19.
In the menu, you set the current time using the arrow buttons. See Figure
20. (Note: These two "set clock" steps will be skipped if the unit is already
connected to Wi-Fi.)
First, set the hour.
Figure 19
MENU
Figure 20
MENU
Figure 21
MENU
Figure 22
MENU
Using the leftmost button, you switch to the minutes and complete setting
the time. See Figure 21.
You select your mode. Either cool, heat, or auto. Toggle these using the
arrow buttons. See Figure 22. (Note: cooling-only models skip this step.)
The process is the same for all three modes. Auto mode will be shown as
the example.
13