Friedrich Kühl KCS08 Manuel D'installation Et D'utilisation page 26

Kühl Standard Chassis
®
Performance Testing Installation and Test Method continued
Test Unit Installation
As per ANSI/ASHRAE Standard 16-1983 (RA 2009), section 4.2.2, this air conditioner shall be installed per the instructions specified in this Installation &
Operation Manual.
Test Unit Settings
Louver position:
• Louvers shall be kept in the recessed position (not extended)
• Louvers shall be centered (not directed left or right) and pointed upward
Fan speed:
• Fan shall be set to the highest speed setting
• HIGH
System Operation:
• Unit shall be operating in "Cool" Mode
50
THIS PAGE LEFT INTENTIONALLY BLANK.
51