Installing The Discharge Cover For Mulching - Toro TimeCutter ZS 4200S Manuel De L'utilisateur

1. Latch retainer
2. Latch
4. Release the hook-shaped latch on top of the
discharge cover from the pivot rod
5. Angle the metal tab on the discharge cover out
of the slot in the bracket welded to the mower
deck (Figure 13).
1. Discharge cover
2. Metal tab
Installing the Discharge
Cover for Mulching
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Angle the metal tab on the discharge cover into
the slot in the bracket welded to the mower deck
(Figure 14).
Figure 12
3. Discharge cover
(Figure
Figure 13
3. Bracket on the mower
deck
g293897
1. Discharge cover
2. Metal tab
4. Pivot the discharge cover back and toward the
deck so that the discharge cover aligns with the
16). mower deck
5. On the top of the discharge cover, engage the
hook-shaped latch around the pivot rod of the
g230250
deflector assembly
ARK
15
Figure 14
3. Bracket on the mower
deck
(Figure 15).
Figure 15
(Figure 16).
g230248
g230249