Fixing The Front Panel; Installing The Remote Control Unit - Pioneer AVH-P7800DVD Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• When installing in a shallow space,
use the following screw holes. In
this case, stick conceal tape on parts
that protrude from the dashboard.
* 1
Factory radio mounting
bracket
*2
*2 If the screw holes of the bracket and the
screw holes of this unit are not aligned, use a
file to widen the screw holes of the bracket to
match up the screw holes on this unit.
Tighten the screws at 2 places on each side.
Conceal tape
Fig. 18
Screw
Dashboard or
Console
Fig. 19

Fixing the front panel

If you do not operate the removing and
attaching the front panel function, use
the supplied fixing screws to fix the
front panel to this unit.
Fixing screws
Fixing screws

Installing the remote control unit

When not using the remote control
unit, secure it with velcro tape to pre-
vent it from moving.
• Thoroughly wipe off the surface
before affixing the velcro tape.
Fig. 20
Remote control
unit
Velcro tape (small)
(hard)
Velcro tape (small)
(soft)
Fig. 21
18

Publicité

Chapitres

Table des Matières
loading

Table des Matières