Din Front/Rear-Mount; Before Installing The Unit; Din Front-Mount; Installation With The Rubber Bush - Pioneer AVH-P7800DVD Manuel D'installation

Mounting with Velcro Tape
Thoroughly wipe off the surface
before affixing the velcro tape.
Car mat or chassis

DIN Front/Rear-mount

This unit can be properly installed
either from "Front" (conventional DIN
Front-mount) or "Rear" (DIN Rear-
mount installation, utilizing threaded
screw holes at the sides of unit chas-
sis). For details, refer to the following
illustrated installation methods.

Before installing the unit

• Remove the holder. (Fig. 13)
Loosen the screws (2 × 3 mm) and
then remove the holder.
Holder
Screw (2 × 3 mm)
Hide-away unit
Velcro tape
(large) (hard)
Velcro tape
(large) (soft)
Fig. 12
Fig. 13

DIN Front-mount

Installation with the rubber bush

1. Decide the position of the side
brackets. (Fig. 14)
When installing in a shallow space,
change the position of side brackets. In
this case, stick conceal tape on parts
that protrude from the dashboard.
Side bracket
Flush surface screw (5 × 6 mm)
Conceal tape
Fig. 14
16