Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• When installing in a shallow space,
use the following screw holes. In
this case, stick conceal tape on parts
that protrude from the dashboard.
* 1
* 1
Factory radio mounting
bracket
*2
*2 If the screw holes of the bracket and the
screw holes of this unit are not aligned, use a
file to widen the screw holes of the bracket to
match up the screw holes on this unit.
Tighten the screws at 2 places on each side.
Conceal tape
Fig. 15
Screw
Dashboard or
Console
Fig. 16
Fixing the front panel
If you do not operate the removing and
attaching the front panel function, use
the supplied fixing screws to fix the
front panel to this unit.
• Fix the front panel to the unit
using fixing screws after remov-
ing the front panel. (Fig. 17)
Fixing screw
Installing the remote control unit
When not using the remote control
unit, secure it with velcro tape to pre-
vent it from moving.
• Thoroughly wipe off the surface
before affixing the velcro tape.
Fixing screw
Fig. 17
Remote control
unit
Velcro tape (small)
(hard)
Velcro tape (small)
(soft)
Fig. 18
16
Publicité
Chapitres
Table des Matières
