Introduction - Hayward Salt & Swim Manuel D'utilisation

The Hayward Salt & Swim
Ground Pool sanitization. This model offers a standard blade type 120V linecord for power and PVC
adapters for return jet mounting.
The Salt & Swim requires a low concentration of salt (sodium chloride) in the pool water. It automatically
sanitizes your pool by converting the salt into free chlorine which kills bacteria and algae in the water.
Chlorine will revert back to sodium chloride after killing bacteria. These reactions will continuously
recycle virtually eliminating the need to add sanitizing chemicals to your pool.
The SAS-ABG-CUL can handle the purification needs of most residential swimming pools up to 23,000
gallons (87,000 liters). This unique low cost chlorine generator uses a replaceable electrolytic Cell
that is designed to produce 155 lbs of 100% available chlorine over its lifetime.
Note that the actual amount of chlorination required to properly sanitize a pool varies due to bather
load, rainfall, temperature, and the pool's cleanliness.
NOTE: Before installing this product as part of a saline water purification system in a pool or spa
using natural stone for coping or for immediately adjacent patios/decking, a qualified stone instal-
lation specialist should be consulted regarding the appropriate type, installation, sealant (if any) and
maintenance of stone used around a saline pool with electronic chlorine generator in your particular
location and circumstances.
NOTE: The use of dry acid (sodium bisulfate) to adjust pool pH is discouraged especially in arid regions
where pool water is subject to excessive evaporation and is not commonly diluted with fresh water.
Dry acid can cause a buildup of by-products that can damage your chlorinator Cell.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

Introduction

SAS-ABG-CUL is an automatic chlorine generation systems for Above
TM
1