Hayward Salt & Swim Manuel D'utilisation page 7

5. WIth the Hose Clamp already on the flexible
pipe, slip the pipe on to the Hose Pipe As-
sembly as shown. Tighten the Hose Clamp
firmly.
Remove the foam protector from the Cell. Fully cover Cell pins with the supplied grease. Verify that
the O-ring is attached to the Cell before inserting the Cell into the Cell Vessel as shown.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Handtighten
both Unions.
6. Position the Vessel in a manner where
the Cell can be easily inserted and re-
moved. Secure the Vessel by handtight-
ening both Unions.
5