Preparatory Work - KTM Power Parts 79635941044 Manuel D'installation

Scope of supply
1x fan cpl. (preassembled)
1x fan bracket
4x screw K50x18
1x relay
2x screw K50x12
2x screw 50x10

Preparatory work

- Take off the seat (see the Owner's Manual).
- Remove the fuel tank (see the Owner's Manual).
- Drain the coolant (see the Owner's Manual).
Assembly
- Remove screws .
- Remove the radiator shield.
- Release hose clip .
- Detach the radiator hose.
- Remove hose clamp .
- Pull off the vent hose.
- Release hose clip .
- Detach the radiator hose.
- Remove radiator.
- Position fan (included) on the radiator.
- Mount and tighten screws
- Mount and tighten screws
- Position the radiator.
- Mount the radiator hose.
- Position and tighten hose clip
- Mount the vent hose.
- Position hose clamp .
- Mount the radiator hose.
- Position hose clip and tighten it.
(included).
(included).
.
5