Retrieving Saved Radio Stations; Automatic Station Search (Ams Function); Automatic Switch Off (Sleep Timer) - SilverCrest SIUR 10 A1 Mode D'emploi

Retrieving saved radio stations

Precondition: The device is in radio mode.
♦ Use the Preset+ and Preset– control points
Pr+/Pr keys
slot between

Automatic station search (AMS function)

Precondition: The device is in radio mode.
You can carry out a station search to automatically allocate the memory slots
with suffi ciently strong stations.
NOTE
► An automatic station search deletes all the previously saved stations.
♦ Touch the User control point
press the User key
user (1 or 2).
♦ Touch the Mem.|AMS control point
or press the MEM AMS key
The device starts the search run and allocates memory slots
stations it fi nds for the set user.
NOTE
► If more than 32 stations are found, only the fi rst 32 reception frequencies
will be saved.
► If less than 32 radio stations are found, the last memory slots remain
unchanged.
Automatic switch off (Sleep timer)
The sleep timer switches the radio function off automatically for an adjustable
period of between 5 and 120 minutes.
♦ To do this, press the
the remote control for 3 seconds. If the radio function was not yet active,
it will now be switched on and the maximum number of minutes for which
the radio will remain switched on will be shown in the display
♦ Repeatedly press the
the remote control to decrease the number of minutes in steps of 5 minutes.
The
SIUR 10 A1
/ on the remote control to select the required memory
1 32
and for the saved radio station.
on the device for around three seconds or
on the remote control to switch between the required
on the remote control to start the search run.
– key on the device or the
– key
symbol in the display
/ on the device or, the
on the device for around 3 seconds
–Sleep key
on the device or the –Sleep key
blinks while the sleep timer is active.
1 32
– with the
on
120
( ).
on
143
GB