Radio Operation; Switching The Radio On/Off; Adjusting The Volume; Switching Between Mono And Stereo - SilverCrest SIUR 10 A1 Mode D'emploi

NOTE
► The alarm becomes active again when the next alarm time has arrived
(i.e. on the next day).

Radio operation

NOTE
► For good radio reception the cable antenna
unwound. Align the aerial for the best reception in radio mode.
Switching the radio on/off
♦ Switch the radio on by pressing the
on the remote control. The display
♦ If you want to switch the radio off , either press the
or the
to the clock/standby operating mode and show the current time.

Adjusting the volume

♦ Stroke your fi nger from left to right across the < Volume >
control point
♦ Stroke in the opposite direction to decrease the volume. You can also press
the Vol+ key
Vol– key

Switching between mono and stereo

♦ If interference occurs when playing radio programs in stereo, touch the
ST.|MO key
control. The Stereo wording in the display
♦ Touch the ST.|MO control point
key
SIUR 10 A1
key on the remote control. The device will then change back
on the device to increase the volume.
to increase the volume using the remote control, or the
to decrease it.
on the device or press the ST MO key
on the remote control to switch back to stereo play.
must be completely
key on the device or the
shows the current reception frequency.
key
on the remote
will then go off .
on the device or press the ST MO
GB
key
on the device
141