Manual Station Search; Saving Stations Manually - SilverCrest SRWK 800 A1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 72

Manual station search

In radio mode, press the
button for about 2 seconds to search for a station with a lower
or higher frequency . The search stops at the first station with a
sufficiently strong signal .
Searching for stations manually
In radio mode, set the desired station by turning the TUNING/
MIN. ‒ /+ dial
clockwise or anticlockwise to search for a radio station with lower
or higher frequency . The frequency can be changed in steps of
0 .05 MHz .
NOTE
The frequency of the station is shown on the display
loudspeaker

Saving stations manually

To store the current radio station, briefly press the
button
7
the desired programme position (P01–P20) . The programme
position numbers are shown at the bottom of the display
Briefly press the
radio station in the selected programme position .
Calling up saved stations
In radio mode, briefly press the
the next higher programme position .
Alternatively, press the
3 seconds, use the TUNING/MIN. ‒ /+ dial
desired programme position (P01–P20) . To do so, turn the
TUNING/MIN. ‒ /+ dial
search for a lower or higher programme position .
52 
GB │ IE
. To do so, turn the TUNING/MIN. ‒ /+ dial
3
is switched off during station search .
0
and then use the TUNING/MIN. ‒ /+ dial
│+/MEM button
│‒
or the
5
7
│‒ button
│‒ button
5
clockwise or anticlockwise to
3
│+/MEM
1
│+/MEM
3
to save the current
once to call up
5
and, within the next
to select the
3
SRWK 800 A1
7
3
and the
to select
.
1

Publicité

Table des Matières
loading

Table des Matières