Fault Rectifi Cation; Fault Causes And Rectifi Cation - SilverCrest SIUR 10 A1 Mode D'emploi

Fault rectifi cation
This section contains important information on fault localisation and rectifi cation.
Follow the instructions to avert hazards and damage.
WARNING
To avoid risks and property damage, pay heed to the following safety instructions:
► Repairs to electrical devices may only be carried out by specialists trained
by the manufacturer. Improper repairs can represent considerable risk to
users and can cause damage to the device.
Fault causes and rectifi cation
The following table will help with localising and remedying minor malfunctions:
Defect
The display
indicates nothing.
No sound.
Interference with
the radio reception.
NOTE
► If you cannot solve the problem using any of the aforementioned methods,
please contact the Customer Service department.
SIUR 10 A1
Possible cause
The plug is not connected.
The mains power socket is
not supplying power.
The volume is set to minimum. Increase the playback volume.
The radio is switched off .
The transmitter is not prop-
erly adjusted.
The reception is weak.
Rectifi cation
Insert the plug into the mains power
socket.
Check the house fuse.
Switch the radio on.
Adjust the station correctly.
Try placing the cable antenna in a
diff erent direction in order to improve
reception.
GB
147