Output Voltage - BONFIGLIOLI Vectron ACU-P Mode D'emploi

Note:
Voltage and frequency values above the display range of 999.99 can only be set
and displayed via software Vplus.
Additional advice about setting of the parameter 851:
Assembly
No module:
EM-xx-xx
(except EM RES-03)
EM-RES-03
05/ 2014
Operation Mode
Adjustment range: 0(Off) -122-220-321-322
Default: 0
(see table "additional advice about setting the parameter 851")
Max Feedback Voltage
Minimum: 0,0
Maximum: 6500,0V
Default: 298,5V
Confirm the „End" display by pressing the ENT-key. The
guided commissioning of the frequency inverter is terminated
via reset and the initialization of the frequency inverter.
After successful initialization of the frequency inverter the
factory- set parameter
Setting Description
321 DC voltage at analog input basic unit
122 AC voltage 1- phase at analog input expansion module
321 DC voltage at analog input basic unit
322 DC voltage at analog input expansion module
220 AC voltage 2-phase at the Resolver input EM-RES-03
321 DC voltage at analog input basic unit
42
851 - Automatic voltage control
871
842 is displayed.

Output Voltage

Quick Start Guide ACU-P
GB
D