Matrix XIR Guide D'utilisation page 8

BEFORE YOU BEGIN
INITIAL SETUP
XER When you power on the console for the first time you
will be prompted to perform initial setup.
XIR
1) Select your language and touch
CONNECT WI-FI *
2) Choose from the available wireless networks detected and shown on
screen. If you do not see your network, you can add it manually via the
OTHER option. If you do not want to set up Wi-Fi at this time, touch
3) Use the keyboard to enter your Wi-Fi network password. Touch
4) Wi-Fi connection status and signal strength will be indicated by
the symbol in the upper right corner of the display.
MODEL SETUP
5) Select your frame model number and touch
DATE AND TIME SETUP
6) If the console has been connected to Wi-Fi, it will detect your
location and fill in time and date info automatically.
7) Change any time and date settings as desired and touch
SET UP XID ACCOUNT FOR VIAFIT CONNECTIVITY
Creating an xID account will allow you to save and share workout data online at
www.viafitness.com
Create and save up to four xID accounts directly from the console.
1) If you already have an xID, touch Log In. To continue
without creating an xID touch Skip xID.
2) Enter your phone number or another easy-to-remember 10-14
digit number. This will be your xID. Touch
3) Create an easy to remember 4-digit passcode. Touch
4) Enter your email address. This must be a unique email address. Touch
5) Fill in your profile information to finish the xID account
set up process. Touch
6) Confirm your information and select the I accept the terms and conditions
box to review the Terms and Conditions. Touch
7) Check the Share Information box to share your workouts to the ViaFit community.
8
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to complete xID setup.
.
to confirm.
GETTING STARTED
1) Touch GO to begin working out immediately. Or...
2) Touch the WORKOUT CATEGORY button of your choice.
TREADMILLS ONLY:
• Stand on the side rails of the treadmill.
• Attach the safety key clip to part of your clothing making sure that
it is secure and will not become detached during operation.
• Insert the safety key into the safety keyhole.
to confirm.