Care & Maintenance; Lubrication - Power Fist 8964793 Manuel

8964793
• 45 degree horizonal angle to either side of the centerline.
Use a pulley with a suitably strong attachment point if the required angle
exceeds either (or both) of these limitations.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool clean, dry and free from oil/grease at all times.
6. Maintain the tool' s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Clean the external surfaces with cloth after each use.

LUBRICATION

The winch is permanently lubricated and does not require additional
lubrication. The exception is if the winch is submerged in water. Open the
housing, dry and have a qualified technician re-lubricate the winch.
Lubricate the steel cable with a light oil from time to time to prevent
corrosion.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
12
12V DC Winch
For technical questions call 1-800-665-8685
V1.0