Care & Maintenance; Lubrication - Power Fist 8900722 Mode D'emploi

8900722
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components.
3. Follow instructions for lubricating and changing accessories.
4. Keep the tool handles clean, dry and free from oil/grease at all times.
5. Inspect the tool fittings periodically. Have damaged or worn
components repaired or replaced by an authorized technician.
6. When servicing, use only identical replacement parts. Only use accessories
intended for use with this tool. Replace damaged parts immediately.
7. Maintain the tool's label and name plate. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Wipe external surfaces of the winch with a clean cloth after each use.

LUBRICATION

1. Inspect and lubricate the tool when required.
2. Lubricate the cable and hook with light grease after the first 20 hours
of operation.
3. Lubricate the gears every 6 months.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
8
Reversible Hand Winch With Cable
For technical questions call 1-800-665-8685
V1.0