Power Fist 8964793 Manuel page 13

V1.0
service the tool.
Problem(s)
Motor
overheats.
Motor does not
turn on.
Motor runs,
but steel cable
drum does not
turn.
Motor runs
slowly or
without
normal power.
Motor runs in
one direction
only.
Motor is water
damaged.
Visit www.princessauto.com for more information
12V DC Winch
Possible Cause(s)
1. Incorrect power
cord.
2. Winch running time
too long.
1. Remote damaged.
2. Defective motor.
3. Internal damage or
wear.
Clutch not engaged.
1. Insufficient current
or voltage.
2. Incorrect power
cords.
1. Remote damaged.
2. Defective remote
button.
Submerged in water or
water from pressure
washing.
Suggested Solution(s)
1. Use only supplied power cord.
2. Allow winch to cool down
periodically.
1. Replace remote.
2. Check for voltage at armature
port with switch pressed. If
voltage is present, replace
motor.
3. Have technician service winch.
Move the clutch handle to the
engaged position. If problem
persists, a qualified technician
needs to check and repair.
1. Connect to appropriate power
supply.
2. Use only supplied power cords.
1. Repair or replace solenoid.
2. Replace remote.
Allow to drain and dry thoroughly,
then run the motor without load in
short bursts to dry the windings.
8964793
13