Valor 539 Série Manuel D'installation Et D'utilisation page 7

Cleaning
WARNING
DO NOT TOUCH THE BARRIER SCREEN, DO NOT TOUCH THE BARRIER SCREEN,
THE CAST FRONT OR THE GLASS WHILE THE CAST FRONT OR THE GLASS WHILE
THEY ARE HOT! THEY ARE HOT! Let the fireplace cool first Let the fireplace cool first
before cleaning it. before cleaning it.
WARNING
F O R Y O U R S A F E T Y, e n s u r e t h e b a r r i e r F O R Y O U R S A F E T Y, e n s u r e t h e b a r r i e r
s c r e e n i s r e i n s t a l l e d o n t h e f i r e p l a c e s c r e e n i s r e i n s t a l l e d o n t h e f i r e p l a c e
a f t e r m a i n t e n a n c e . a f t e r m a i n t e n a n c e .
To clean the barrier screen and the matte black cast
iron surfaces use a soft brush. To clean the polished
cast iron surfaces use mild soap and water.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer's barrier for this
appliance.
To clean the fi replace glass window, refer to the
owner's manual supplied with the appliance.
DO NOT clean the glass with ammonia.
Removing the front unit
1. Remove the barrier screen by pushing it up and
pulling out the bottom then the top.
2. Pull away the hearth fender at the bottom.
3. Unhook the inner cast arch as shown.
Always securely replace the window, the front
and the barrier screen before lighting.
7