Installing Windows - Dometic S7P Mode D'emploi

Installing windows

6.1 Pressing out the hole
See fig. 2
6.2 Preparing the installation
Supplementary to fig. 3
➤ Measure wall thickness W (A)
If the wall thickness is less than 22 mm, then you must add to the wall section
with a suitable mounting frame (B)
➤ Determine the type of clip by referring to the following table:
Wall thickness W
22 – 23 mm
24 – 25 mm
26 – 27 mm
28 – 29 mm
30 – 31 mm
32 – 33 mm
34 – 35 mm
36 – 37 mm
38 – 39 mm
40 – 41 mm
42 – 43 mm
7 Installing windows
See fig. 4
➤ Check that the window has sufficient space around it (approx.1 to 2.5 mm) in the
wall section.
➤ Clean the wall section externally in the mounting area.
6
Clip type
M 1139
M 1110
M 1134
M 1135
M 1136
M 1137
M 1142
M 1143
M 1144
M 1145
M 1146
Ref. no.
9104116094
9104116095
9104116096
9104116097
9104116098
9104116099
9104116100
9104116101
9104116102
9104116031
9104116104
S7P
EN