Recording
REC lamp (red)
(1) Set POWER switch to ON.
(2) Press START/STOP to start recording.
REC lamp (red) lights up during recording.
To stop recording
Press START/STOP button.
To zoom
Press ZOOM button.
Press T for telephoto (subject appears closer) and W for wide-angle (subject appears
farther away).
You cannot changing the zooming speed of the camcorder.
Note
When you use a wide-conversion lens, the picture will dim by pressing zoom T.
To keep a subject in focus
After you focus on a subject, press AUTO FOCUS ON/OFF button to set the camcorder
to manual focus mode.
Even if fish swim between the camcorder and the subject, you can still keep the subject
in focus.
Note on before recording
Check that the equipment operates correctly and that there is no water leakage at a
depth of about one meter (3 feet) before you dive deeper.
Note on recording
Do not cover the control emitter or detector with you finger because the remote control
signal for operations is transmitted from the grip to the marine pack.
10
-EN
POWER switch
AUTO FOCUS
ON/OFF button
ZOOM button
START/STOP button