Switching Off The Engine - Ammann AVP 1240-2 Traduction Du Mode D'emploi Original

3.3.2 If the engine starts
1 – 2 min.
– Adjust engine speed control lever (1) to idle position.
– Allow the engine to warm up for 1 ... 2 minutes.
If the motor does not ignite after several unsuccessful
attemps at starting, move the speed control lever back
into stop position and pull the starting rope through
Important
slowly, 5 times. Then repeat the starting procedure.

3.3.3 Switching off the engine

– Adjust engine speed control lever (1) to idle position.
1
min
max
B1799205.cdr
B1799206.cdr
– Press motor stop button (4), until the motor stops running.
– Release the stop button (stop button must return to its initial
position).
42
STOP
4
3. Operation