Operation; Water Spray - Ammann AVP 1240-2 Traduction Du Mode D'emploi Original

3. Operation

3.7 Operation
– The vibration plate can be operated as soon as the engine re-
acts to brief acceleration.
– Move engine speed control lever to full load.
Operate vibration plate only at full throttle and dur-
ing brief rest periods, always move vibration plate
to idle speed otherwise the centrifugal clutch will
Attention
slip and be damaged!
– The vibration plate is steered by moving the towbar to the
side. The towbar can also be moved over to the other side
when working in confined areas.
– The vibration plate can only be stopped by moving the engine
speed control lever to the idle position.

3.8 Water spray

1
B1399108.cdr
Cock (1) turning
Position «I» = Water spray off
Position «II» = Water spray on
If there is a risk of frost, the spraying system should be
completeley emptied respt. filled with antifreeze.
Important
B1399512.cdr
1)
Special equipment
49
1)
II
I