Connecting The Air Hose - A&D UA-702 Manuel D'instructions

Using the Monitor
1. Installing / changing the batteries
Remove the battery cover and insert new batteries into the battery
compartment as shown, taking care that the polarities (+) and (-) are observed.
Use only R6P, LR6, AA or similar type batteries.
• Insert the batteries as shown in the battery compartment. If not, the device
will not work.
• When
batteries with new ones at the same time. Do not mix old and new batteries.
It may shorten the battery life, or cause the device to malfunction.
• (LOW BATTERY mark) does not appear when the batteries are drained.
• Battery life varies with the ambient temperature and may be shorter at low
temperatures.
• Remove the batteries if the device is not to be used for a long period of time.
The batteries may leak and cause a malfunction.
• Use the specified batteries only. The batteries provided with the device are
for testing monitor performance and may have a shorter life.

2. Connecting the air hose

Insert the air connector plug into the air socket firmly.
(LOW BATTERY mark) appears in the display, replace all
ENGLISH 4