Dimplex XLE Serie Mode D'emploi page 20

Choosing and Setting a Mode
Timer Modes
To choose a timer mode press Menu and then
Then select Timer Mode, again using the Enter button.
Select the mode required, by pressing the
For options Out All Day, and User Timer, three choices are available - Select, Preview
and Modify.
• Select - choose this timer option.
• Preview - view the times currently set.
• Modify - change the times currently set.
When Modify is chosen, select and change each option using the
buttons. At the end of each period, select Next to move to the following period. When
a day is complete select Save to update it.
Once the first day has been set up it is possible to copy these settings to successive
days or all days by either choosing Copy Next or Copy All.
If preferred each day can be modified individually and saved. It is also possible to
Clear each day or Clear All days to factory default times. Options are;
• Save - save times for one day.
• Copy Next - copy times to following day.
• Copy All - copy times to all seven days.
• Clear - factory defaults all times that day.
• Clear All - factory default times for all seven days.
To select a mode, choose Select and press Enter.
Ou t All Day
Co mfort On
NOTE:
Once modified a programme
must be selected if you want
to begin using it.
20
to select Mode. Then press Enter.
or followed by Enter.
M ai n Me nu
D ate / Ti m e
Mo d e
O p t i o ns
, and Enter
M o d e
Ti m e r
B o ost
Se t b a c k
Co py Al l
S e l e c te d