6.4
access panel
WARNING
!
•
Do not use this appliance if any part has been under water. Call a qualifi ed service technician immediately to
have the appliance inspected for damage to the electrical circuit.
•
Risk of electrical shock or explosion. Do not wire 110V to the valve or to the appliance wall switch. Incorrect
wiring will damage controls.
•
All wiring should be done by a qualifi ed electrician and shall be in compliance with local codes. In the
absence of local codes, use the current CSA22.1 Canadian Electric Code in Canada or the current National
Electric Code ANSI/NFPA NO. 70 in the United States.
Before finishing in the appliance, test the operation see "operation" section in the owner's manual. Once finished
in, access to the control components can only be done through the inside of the appliance.
electrical information
43.1
L38 Illustrated
W415-1707 / 07.04.17
EN
35