Side View - Napoleon Acies Série Manuel D'installation

finishing
EN
WARNING
!
• Non-combustible finishing material tight to the frame around the finishing flange must not project more than
4" (10cm) from the face of the safety barrier (above the door and sides only). If greater projections are needed,
increase the clearance to the sides and top by a minimum of 2" (51mm) for every 1" (25mm) projection.
4" (10cm)
Maximum
protrusion
(must not encroach
on finishing flange)
48
W415-1707 / 07.04.17
4" (10cm)
Maximum
protrusion
(must not encroach
on finishing flange)

SIDE VIEW

4"
10cm
SIDE VIEW
4"
10cm
Max
SAFETY
BARRIER
finishing
flange all
around