Electrical Information; Hard Wiring Connection; Receptacle Wiring Diagram; In The Event Of A Power Failure - Napoleon Acies Série Manuel D'installation

electrical information

6.0 electrical information
EN
6.1

hard wiring connection

It is necessary to hard wire this appliance.
Permanently framing the appliance with an enclosure, requires the appliance junction box to be hard wired.
This appliance must be electrically connected and grounded in accordance with local codes. In the absence
of local codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the ANSI/NFPA 70-1996
National Electrical Code in the United States.
6.2

receptacle wiring diagram

Route power supply and optional LHAD kit through the outer firebox to the receptacle mounted on the bottom
of the appliance. For optional LHAD kit installation, please refer to the leaflet provided in the kit.
6.3

in the event of a power failure

If the battery holder is equipped with 4 "AA" batteries, the appliance will still have on/off functions during a power
failure.
34
W415-1707 / 07.04.17
cable connector holes
L1
L2
To optional LHAD kit
Power Supply
Cable Connector